Finding Better Manufacturing Equipment

• Monitoring The Demolition Of Your Home: 3 Types Of Safety Equipment To Have With You

  5 October 2016

  If you've always felt that your home would be perfect once a small structural component was corrected, make your dreams come true by hiring a demolition and renovation contractor. Demolishing part of a home can be tricky, as the demolition contractor will need to preserve the integrity and structure of some parts of the house. Because of this reason, simple demolition projects can cost between $1,000 to $10,000 whereas more complicated and complex demolition projects can cost as much as $15,000 to $75,000.

• 3 Ways Old Jeans Can Be Used for Home-Improvement Projects

  8 September 2016

  As you look through your closet, you will likely find one pair of jeans you no longer wear. It may be hard to part with that special piece of denim, but you would be surprised at how many different ways it can get re-purposed in your home. Whether you're creating products yourself or donating the denim for use in the industry, there are multiple ways to re-purpose denim in your home.

• Thermal Stratification--How You Can Reduce Or Eliminate This Costly Energy-Waster

  15 August 2016

  Heating and cooling your building can be a huge drain on your financial bottom line, especially if you are wasting energy in the process. While there are a lot of ways to prevent unnecessary energy usage, such as installing weatherstripping, updating your heating and cooling systems, and adding insulation, one of the most important things you can do is implementing thermal destratification. Below is more information on thermal stratification and how you can combat this problem in your facility:

• Maintenance Tasks To Keep Your Rotary Bender In Great Condition

  9 August 2016

  If you have a sheet metal fabrication company that has recently branched out to create small circular bent pieces, like brackets and other attachments, then you can use a rotary bending process to create your parts. This helps to keep pieces from becoming scratched or marred during the fabrication process. A rotary hand bender is the type of tool you will need. These benders are compact stand-mounted tools that are a bit more complicated than the brake and bench benders that you are likely used to.

• Reciprocating Air Compressor Consumable Parts: What You Should Periodically Replace To Maintain Your Compressor

  2 August 2016

  Reciprocating air compressors are one of themost common types of compressors in use, and for good reason; they are affordable, reliable and able to produce high-pressure airflow suitable for most general purpose applications. In addition, reciprocating compressors are the simplest compressor type from a repair and maintenance perspective, and most individuals who are handy with basic tools are able to perform the tasks necessary to keep them running. Despite their reliability, reciprocating air compressors contain a few parts that should be considered consumable and that will eventually need replacing.